8-6 Accessories
External Rewinder (ER1)
To handle large print jobs, the external rewinder is available which allows
you to rewind complete rolls of label material.
The rewinder is powered and controlled directly by the peripheral port of the
printer. The rewinder operates only when the printer is feeding media. After
completion of the paper feed the rewinder runs for a maximum of one more
second.
Safety Instructions
Delivery Contents
1 Rewinder
Note: This accessory is compatible only with the Pronto! 482 and 486 models.
Caution:
• The printer must be switched off before attaching the rewinder!
• During operation, the rotating rewind axle with the mounted flange is
accessible. Ensure that loose hanging jewelry, hair etc. are kept clear of the
moving parts.
Risk of injury from moving parts!
• Do not change the rewinding direction when the rewind axle is turning!
Note: Retain packing material for later use!
To Next Page
Loading...
Need help?
General
