5-16 Configuration
The "Ready" event provides information on when the printer was switched
on.
The buttons on the bottom line of the "Status" tab have the following
functions:
Button Function
Display Opens a window which shows the current printer
display.
You can set the update interval on the scale below the
display. The display is not updated automatically with
the "0" setting.
Reset Hard: functions like switch-off and switch-on
Soft: functions like the cancel key
Print Opens the window for the settings of a local printer or
network printer to be used to print the contents of the
"Status" tab.
Update Updates the display on the "Status" tab.
To Next Page
Loading...