QuickLabel Systems pronto! 486 User Manual

Pronto! 482/486/682/863 5-9
IEEE 1284 Configuration of the optional parallel
interface. See the documentation of the
parallel interface.
If interface is not installed, this option is not
available.
RS-422/485 Configuration of the optional serial RS-422
or RS-485 interface. See documentation of
the serial interface.
If interface is not installed, this option is not
available
Wireless LAN
802.11
Configuration of the optional WLAN card
If interface is not installed, this option is not available
Ethernet Configuration parameters of the Ethernet interface card.
You can access additional configuration parameters for the
Ethernet interface card via the printer website (see Setup tab on
page 5-17).
> DHCP Method of issuing IP address
On: Dynamic issuing of IP address by the
DHCP server
Off: Direct issuing of the IP address by the
operator
On
> IP IP address of the label printer. Only valid
with DHCP = Off.
> Mask Subnet mask (classification and address
range) of the local network. Only valid with
DHCP = Off.
Parameter Meaning Default

QuickLabel Systems pronto! 486 Specifications

General

Brand	QuickLabel Systems
Model	pronto! 486
Category	Label Maker
Language	English