Dear customer,
By purchasing the QUANTRON-A control unit for the AXIS and MDS fertilizer spreader, you have
shown confidence in our product. Thank you very much! We want to justify this confidence. You
have purchased a powerful and reliable machine control unit.
However, in case unexpected problems arise, our customer service department is always there for
you.
Please read this operator's manual as well as the operator’s manual for the machine
carefully before using the machine, and follow the advice given.
This manual may also describe equipment that is not included in your control unit.
Note the serial number of the control unit and of the machine
The control unit QUANTRON-A has been calibrated at the factory for the mineral
fertilizer spreader with which it was supplied.. It cannot be connected to another
machine without new calibration.
Please enter the serial number of the machine control unit and of the machine
here. When connecting the machine control unit to the machine, these numbers
must be checked.
• Serial number of control unit:
• Serial number and year of manufacture of the machine:
Technical improvements
We continuously strive to improve our products. For this reason, we reserve the right to make any
improvements and changes to our machine that we consider necessary without notice. We do not
accept any obligation to make such improvements or changes on machines that have already been
sold.
We will be pleased to answer any other questions that you might have.
Yours sincerely
RAUCH Landmaschinenfabrik GmbH
To Next Page
Loading...
Need help?
General
