Rauch QUANTRON User Manual

Sub-menu Meaning Description
Bound. disc speed Pre-setting the RPM in the boundary
spreading spreading mode
To be entered in a separate
input window
TELIMAT Full bord./
Limited bd
Saving the TELIMAT settings for
boundary spreading
Only for machines with TELIMAT
sensor
Bound.quantity (%) Pre-setting the application rate
reduction in boundary spreading mode
To be entered in a separate
input window
Fertilisation method
Selection list:
• Normal
• Late sprd.
Selection with arrow keys
Confirmation with the Enter key
Mounting height Indicated in cm front/cm rear
Selection list:
• 0/6
• 40/40
• 50/50
• 60/60
• 70/70
• 70/76
Manufacturer Fertilizer manufacturer input
Composition Percentage of the chemical
composition
Distance factor Input of the distance factor from the
fertilizer chart. Required for OptiPoint
calculation
Calculate OptiPoint Input of the GPS control parameters 4.6.9 Calculate OptiPoint
GPS-Control info Display of information of the GPS
Control parameters
4.6.10 GPS Control info
Fertiliser chart Management of fertilizer charts 4.6.11 Fertilizer charts
Calculate VariSpread Calculation of values for adjustable
sections
4.6.12 Calculate VariSpread
4.6.1 Application rate
In this menu, enter the target value for the desired application rate.
4. Operation
QUANTRON-A AXIS/MDS 5902662
45

Rauch QUANTRON Specifications

General

Brand	Rauch
Model	QUANTRON
Category	Control Unit
Language	English