Overwriting characters:
u
Use the function keys to move the cursor to the position of the character to be deleted in the
input field.
u
Use the arrow keys to select the character to be written in the character field.
u
Press the Enter key.
The character is overwritten.
u
Press the F4/OK function key.
The input is confirmed.
The control unit saves the text.
The display shows the previous menu.
It is not possible to delete individual characters. Individual characters can only be replaced with a
blank space (underline at the end of the first 2 character lines).
The complete input can be deleted.
Deleting an input:
u
Press the C 100% key.
The complete input is deleted.
u
Enter new text, if necessary.
u
Press the F4/OK function key.
4.14.2 Entering values
In some menus, you can enter numerical values.
Fig. 48: Input of numerical value (example: application rate)
[1] Input field
4. Operation
QUANTRON-A AXIS/MDS 5902662
87
To Next Page
Loading...
