Rauch QUANTRON - Setting the Mode

Fig. 41: Display fields
[1] Display field 1
[2] Display field 2
[3] Display field 3
Select display
u
Access the menu System/Test> Display configuration.
u
Select the required display field.
u
Press the Enter key.
The available options are displayed in a list.
u
Select the new value to be assigned to the display field.
u
Press the Enter key.
The operating screen is displayed.
The respective display field displays the new value.
4.10.3 Setting the mode
In the QUANTRON-A control unit, 2 different modes are available.
• Easy
• Expert
In the M EMC function, the mode is automatically set to expert.
• In the Easy mode, only the parameters of the fertilizer settings required for spreading can be
accessed: It is not possible to create or manage fertilizer charts.
• In Expert mode, all available parameters can be accessed in the Fertilizer settings menu.
4. Operation
76
5902662 QUANTRON-A AXIS/MDS