Rauch QUANTRON User Manual

CAUTION!
Risk of injury due to automatic adjustment of the drop point
When the Start/Stop function key is pressed, the drop point is automatically moved to the preset
value by an electrical actuator (Speedservo). This may cause injury.
▶
Before pressing the Start/Stop key, ensure that nobody is present in the hazard zone of the
machine.
▶
Acknowledge the “Approach drop point” alarm message by pressing Start/Stop.
4.6.5 Calibration
The Start calibration menu is locked for the weighing spreaders function and for all machines in
operating mode AUTO km/h + AUTO kg. This menu item is inactive.
In this menu, you can determine the flow factor based on a calibration and save it in the control unit.
Execute the calibration:
• Before spreading for the first time
• If the fertilizer quality has changed significantly (moisture, high dust content, granulate damage)
• If a new fertilizer type is used
The calibration must either be conducted with a running PTO at a standstill or while driving over a test
section.
u
Remove both spreading discs.
u
Move the drop point to the calibration position (value 0).
4. Operation
QUANTRON-A AXIS/MDS 5902662
49

Rauch QUANTRON Specifications

General

Brand	Rauch
Model	QUANTRON
Category	Control Unit
Language	English