Fig. 26: Separate control of the left and right flow factor (M EMC function activated)
[1] Flow factor for the right metering slide
opening
[2] Flow factor for the left metering slide
opening
4.6.4 Drop point
AXIS-M Q V8
Entering the drop point for Q variant machines is merely informative and does not affect the
settings of the fertilizer spreader.
In this menu, you can enter the drop point for information purposes.
u
Access the menu Fertiliser settings > Drop point.
u
Determine the position for the drop point using the fertilizer chart.
u
Enter the determined value in the input field.
u
Press the Enter key.
The Fertiliser settings window is displayed with the new drop point.
AXIS-M VS pro
With the AXIS EMC mineral fertilizer spreader, the drop point is set via the electrical drop point
adjustment exclusively.
u
Access the menu Fertiliser settings > Drop point.
u
Determine the position for the drop point using the fertilizer chart.
u
Enter the determined value in the input field.
u
Press the Enter key.
The Fertiliser settings window is displayed with the new drop point.
If the drop point is blocked, alarm 17 is displayed; refer to 6.1 Meaning of the alarm messages.
4. Operation
48
5902662 QUANTRON-A AXIS/MDS
To Next Page
Loading...
Need help?
General
