4.3 Weighing/Trip counter
This menu provides values regarding spreading work carried out and functions for the weighing
operation.
u
Press the kg key on the control unit.
The Weighing/Trip count. menu appears.
Fig. 17: Menu Weighing/Trip count.
Sub-menu Meaning Description
Trip counter Display of the fertilizer quantity spread,
area spread, and spread distance
4.3.1 Trip counter
Rest (kg, ha, m) For weighing spreaders only: Display of
the remaining quantity in the hopper
4.3.2 Display rest quantity
Meter counter Display of the distance traveled since
the last reset of the meter counter
Reset (zeroing) by pressing the
C 100% key
Zero scales For weighing spreaders only: Weighing
value for empty scales is set to “0 kg”
4.3.3 Zero scales
4.3.1 Trip counter
In this menu, the values of the spreading work carried out can be obtained, the remaining spreading
quantity can be observed, and the trip counter can be reset by deleting.
4. Operation
36
5902662 QUANTRON-A AXIS/MDS
To Next Page
Loading...
Need help?
General
