Assignment of function keys Function
Application rate change on both sides
Application rate change on the right side
Hidden if the function is activated Easy Toggle
Application rate change on the left side
Hidden if the function is activated Easy Toggle
Increase or reduce sections
4.8 Fast emptying
In order to quickly clean the machine after spreading or to quickly empty any residual material, you
can select the Fast emptying menu.
For this purpose, before storing the machine, we recommend completely opening the metering slides
with the fast emptying function and switching off the control unit in this state. This prevents the
accumulation of humidity in the hopper.
Before starting the fast emptying process, care must be taken to ensure that all requirements
have been met. Observe the operator’s manual for the mineral fertilizer spreader (discharging
residual material).
4. Operation
QUANTRON-A AXIS/MDS 5902662
67
To Next Page
Loading...
Need help?
General
