1 User instructions
1.1 About this operator’s manual
This operator’s manual is an integral part of the control unit.
The manual contains important instructions for safe, proper, and economic use and maintenance of
the control unit. Compliance with its stipulations helps to avoid risks, reduce repair costs and
downtime, and to increase the reliability and service life of the machine controlled with it..
The operator's manual must be kept in an easily accessible location close to where the control unit is
used (e.g., in the tractor).
The operator's manual does not replace your own responsibility as operator and operational staff of
the control unit.
1.2 Meaning of warnings
The warnings in the operator’s manual are classified according to the severeness of the risk and the
probability of its occurrence.
The warning symbols draw attention to the unavoidable residual risks inherent in the design to which
users of the machine are exposed. The warnings used are structured as follows:
Symbol + signal word
Explanation
Level of danger of warnings
The level of danger is indicated in the signal word. The levels of danger are classified as follows:
DANGER!
Type and source of danger
This warning warns of a danger posing an immediate threat to the health and life of people.
Ignoring these warnings will result in severe injury or death.
▶
Always observe the measures described to prevent this danger.
WARNING!
Type and source of danger
This warning warns of a potentially dangerous situation for personal health.
Ignoring these warnings leads to severe injury.
▶
Always observe the measures described to prevent this danger.
1. User instructions
6
5902662 QUANTRON-A AXIS/MDS
To Next Page
Loading...
