Editing of the VariSpread table requires specialist knowledge. Please contact your dealer if you
want to change the settings.
Fig. 29: VariSpread calculation, example with 8 sections (4 on each side)
[1] Adjustable section settings [2] Predefined section settings
Communication of the values to the GPS terminal
For machines with VariSpread pro, the values from the VariSpread table are automatically
communicated to the GPS terminal. For machines with VariSpread V8, this depends on the GPS
terminal.
4.7 Machine settings
In this menu, you can enter settings for the tractor and the machine.
u
Access the menu Machine settings.
Fig. 30: Machine settings menu (example)
4. Operation
58
5902662 QUANTRON-A AXIS/MDS
To Next Page
Loading...
