Fig. 18: Trip counter menu
[1] Display of spread quantity since the last
reset
[2] Display of spread area since the last reset
[3] Display of spread distance since the last
reset
[4] Delete trip counter: all values to 0
Delete trip counter
u
Access the sub-menu Weighing/Trip count. > Trip counter.
The values for spread quantity, area, and distance calculated since the last deletion are displayed.
The Delete trip counter field is highlighted.
u
Press the Enter key.
All values of the trip counter are reset to 0.
u
Press the kg key.
The operating screen is displayed again.
Checking the trip counter during spreading
During spreading, i.e. with the metering slides open, you can open the Trip counter menu to display
the current values.
If the values are to be permanently monitored during spreading, freely assignable display fields in
the operating screen can also be assigned the kg tripvalues, ha trip or m trip values, see chapter
4.10.2 Display configuration
4.3.2 Display rest quantity
In the kg left menu, you can obtain the remaining quantity in the hopper.
The menu indicates the possible area (ha) and distance (m) which can still be spread with the
remaining fertilizer quantity.
4. Operation
QUANTRON-A AXIS/MDS 5902662
37
To Next Page
Loading...
Need help?
General
