Sub-menu Meaning Description
Fertiliser name Fertilizer selected from the fertilizer
chart
4.6.11 Fertilizer charts
Appl. rate (kg/ha) Input of target value for the application
rate in kg/ha
4.6.1 Application rate
Working width (m) Determination of the working width to
be spread
4.6.2 Setting the working width
Flow factor Input of flow factor of the fertilizer used 4.6.3 Flow factor
Drop point Input of the drop point
For AXIS with electrical drop point
actuators: Drop point adjustment
Please observe the operator's
manual for the machine.
4.6.4 Drop point
Vane setting Input of vane settings. The display is
only for information purposes
Please observe the operator's
manual for the machine.
Start calibration Accessing the sub-menu for executing
the calibration
4.6.5 Calibration
4.6 Fertiliser settings in Expert-Mode
The Mode setting is described under 4.10.3 Setting the mode.
In this menu, the fertilizer and spreading settings can be changed.
u
Access the menu Main menu > Fertiliser settings.
In the M EMC function, the mode is automatically set to expert.
The entries in the Spreading disc and PTO menu item must correspond to the actual settings of
your machine.
4. Operation
42
5902662 QUANTRON-A AXIS/MDS
To Next Page
Loading...
Need help?
General
