Rauch QUANTRON User Manual

Sub-menu Meaning Description
Appl. rate (kg/ha) Input of target value for the application
rate in kg/ha
4.6.1 Application rate
Working width (m) Determination of the working width to
be spread
4.6.2 Setting the working width
Flow factor Input of flow factor of the fertilizer used 4.6.3 Flow factor
Drop point Input of the drop point
For AXIS with electrical drop point
actuators: Drop point adjustment
Please observe the operator's
manual for the machine.
4.6.4 Drop point
Vane setting Input of vane settings. The display is
only for information purposes
Please observe the operator's
manual for the machine.
Start calibration Accessing the sub-menu for executing
the calibration
4.6.5 Calibration
PTO AXIS-M
Influences the EMC mass flow control
Factory setting:
• AXIS-M 20.2/30.2: 540 rpm
• AXIS-M 50.2: 750 rpm
4.6.6 PTO speed
Spreading disc Setting of the spreading disc type
mounted on the mineral fertilizer
spreader
Influences the EMC mass flow control
Selection list:
• S1
• S2
• S4
• S6
• S8
4.6.7 Disc type
Spreading disc Setting of the spreading disc type
mounted on the mineral fertilizer
spreader
Selection list:
• M1C
• M1XC
• M2
Selection with arrow keys,
confirmation with the Enter key
Bound. sprd.type
Selection list:
• Limited bd
• Full bord.
Selection with arrow keys,
confirmation with the Enter key
4. Operation
44
5902662 QUANTRON-A AXIS/MDS

Rauch QUANTRON Specifications

General

Brand	Rauch
Model	QUANTRON
Category	Control Unit
Language	English