Raven DirecSteer - Page 171

Diagnostics and Troubleshooting
Code ID Description Recommended Actions
523830 .31
Steering not
unlocked.
Enter a steering unlock code. An unlock code is not
necessary if using a SmarTrax™ MD unit.
523832 .0
GPSmode not
unlocked.
Select a different GNSScorrection type or Contact a
local Raven dealer for additional assistance with fea-
ture unlock codes and activation.
523832 .0
GPSmode not
unlocked.
Select a different GNSScorrection type or Contact a
local Raven dealer for additional assistance with fea-
ture unlock codes and activation.
523839 .31
Selected tuneset
not released.
1. Update the steering guidance controller (SGC)
software for the latest list of released tunesets.
2. Recalibrate the steering guidance controller
(SGC) using a generic tuneset.
523842 .31
Liability accept-
ance.
Accept the steering guidance controller (SGC) liability.
523843 .0
Lost internal com-
munication.
1. Cycle power to the machine.
2. Ensure proper CANbus termination.
3. Check cabling and that cable connections are
properly seated.
523844 .11
GPSreceiver
error.
Cycle power to the machine.
523845 .16
GPSreceiver
error: tem-
perature.
523846 .16
GPSreceiver
error: voltage.
523847 .31
GPSreceiver
error: CPU over-
load.
523848 .2
GPSreceiver
error: COM1 buf-
fer overrun.
523849 .2
GPSreceiver
157