Manual No. 016-0171-148 193
Bogballe Calibrator Zurf Interface
Operation
When interfacing with the Bogballe Calibrator Zurf console, the field computer displays the target and actual
rate information from the Calibrator Zurf console in the upper right corner of the Guidance screen.
Hopper Contents
The current hopper content volume registered by the Calibrator Zurf console is displayed in the hopper content
volume display on the field computer Guidance screen.
Area Covered & Coverage Mapping Information
The coverage map and area covered information on the field computer Guidance screen are based on the
GPS location recorded by the field computer.
Area Covered
Target Rate
Actual Rate
Hopper Content
Volume
Coverage Map
To Next Page
Loading...
