Appendix C
194 Envizio Pro and Envizio Pro II Installation and Operation Manual
Application Reports
While interfacing with a Bogballe Calibrator Zurf console, the field computer records coverage area based
upon GPS coordinate data. The coverage area in a field may then be output from the field computer on an
application report for use on a home or office PC.
Note: No field or total volume information is recorded by the field computer while interfacing with the
Bogballe Calibrator Zurf console.
Automatic Variable Rate
If the single product variable rate key (P/N 077-0180-031) is activated, the field computer will send target rate
information to the Calibrator Zurf console for automatic variable rate control and application.
To Next Page
Loading...
