5-14 Raychart 425 Chartplotter
Figure 5-6: System Set Up Menu
3. Using trackpad up/down, select the LANGUAGE option.
4. Using trackpad left/right, select the required language.
5. Press
ENTER to return to the setup functions. The chartplotter now
uses the selected language.
6. Press
CLEAR to return to the normal chart screen.
Checking Chartplotter Operation
To confirm that the chartplotter is operating correctly, perform the
following checks:
1. Press the trackpad left/right, up/down and check cursor movement
and normal scrolling action.
2. Insert a Navionics Nav-chart
®
card for the area of your vessel.
Use the
RANGE key to zoom-in and check that the new chart car-
tridge data is displayed.
3. Ensure that position data is available; use the
FIND SHIP function to
check that the cursor is fixed on the vessel symbol which is correctly
positioned at the centre of the chart display, see Chapter 3:Operation.
To Next Page
Loading...
