Raymarine Raychart 425 - Go to Cursor

Chapter 3: Operation 3-21
or
ii. Press the
GOTO key to display the waypoint options and select
GOTO WAYPOINT; the waypoint list appears. Use the cursor to
select the required waypoint (Figure 3-36):
Figure 3-36: Waypoint List
Alternatively, a waypoint can be selected from the Waypoint List as
described in Section 3.2.
2. Select
GOTO WAYPOINT.
A dotted line is drawn from the vessel’s current position to the
selected waypoint and navigation to the selected waypoint begins.
Go to Cursor
Note: If navigation is currently in progress or if the cursor is homed
(Find Ship) it is not possible to go to cursor.
➤ To navigate directly to the current cursor position:
1. Press the
GOTO key and select GOTO CURSOR. The GOTO CURSOR
function now has help text appended to it (Figure 3-37):
Figure 3-37: GOTO Cursor Function
SIM NU
D4991_2
D4691_1
MOVE CURSOR, "ENTER" TO START
GOTO CURSOR, "CLEAR" TO QUIT
GOTO
CURSOR