3-34 Raychart 425 Chartplotter
SmartRoute
SmartRoute enables the latest track to be converted to a route.
➤ To convert a track to a route:
1. Select
MAKE INTO ROUTE and press ENTER.
The current track is converted to a new route, with the most recently
placed track point as the start of the route, ie. the track is reversed.
If there is an unsaved current route on screen, the option to save the route
is given, see Section 3.3, Working with Routes.
2. Check the calculated route and, in particular, that the route deviation
from the original, given in the warning box, is within navigable lim-
its.
3.8 Displaying Chart Information
Nav-Chart cards include a number of displayed objects for which data is
available, eg. lights, buoys, ports or tidal data. Placing the cursor over an
object displays its associated data in a pop-up box. Typical examples for
Port Services and Tide Information are given below.
Port Services
At detailed chart scales, placing the cursor over a port symbol enables
detailed information to be displayed. Port information is indicated by the
symbol. The port facilities are listed in the object information pop-up
and, where available, details for each facility can be displayed.
In some areas the chart shows symbols for individual facilities. These
facilities and symbols are dependent upon the particular area Nav-Chart
card used.
➤ To obtain port services information:
1. Place the cursor over the port symbol for which information is
required. The
PORT SERVICES function, together with help text, is dis-
played (Figure 3-53):
Figure 3-53: Port Services Function
2. To view the port services available, press ENTER. The available ser-
vices are listed on-screen in an object information pop-up
(Figure 3-54):
D4707_1
To Next Page
Loading...
Need help?
General