Reflex EZ-TRAC User Manual

MANUAL – REFLEX EZ-TRAC™ | 34
8.2.1 Multi Shot enabler
Multi Shot functionality is available as a license key enabled option.
If you have lost your license key, or if you would like to upgrade your
REFLEX™ EZ-COM unit to include Multi Shot functionality, please
contact
REFLEX™ or your authorized REFLEX™ distributor.
Note, the serial number of the
REFLEX™ EZ-COM unit is needed to
obtain the license key. Please refer to the following section.
8.2.1.1 Serial number
The serial number of the REFLEX™ EZ-COM unit is displayed in the
License Key function.
Display serial number
1. From the MAIN menu, select Settings.
2. From the SETTINGS menu, select License Key.
3. The serial number of the unit is displayed to the right.
4. Select CANCEL to return to the SETTINGS menu.
5. In the SETTINGS menu, use the LEFT key to return to the MAIN
menu.
In the figure below, the serial number is 0004.
Figure 20 Serial number
8.2.1.2 Enable Multi Shot
In order to enable the Multi Shot functionality, you need a license key
assigned to your particular
REFLEX™ EZ-COM unit.
Figure 21 Enable Multi Shot

Reflex EZ-TRAC Specifications

General

Brand	Reflex
Model	EZ-TRAC
Category	Measuring Instruments
Language	English