Reflex EZ-TRAC User Manual

MANUAL – REFLEX EZ-TRAC™ | 45
Set Date
1. From the SETTINGS menu, select Date and Time.
2. From the DATE AND TIME menu, select Set Date.
3. Use the UP/DOWN keys to increase/decrease values.
4. Use the LEFT/RIGHT keys to navigate between Year, Month and
Date.
5. When Month is active, use the RIGHT key to go to the SET
option.
6. If needed, use the UP key to navigate back to the Date row.
7. Select SET to set the displayed date.
8. Use the LEFT key to return to the SETTINGS menu.
Figure 41 Set Time
Set Time
1. From the SETTINGS menu, select Date and Time.
2. From the DATE AND TIME menu, select Set Time.
3. Use the UP/DOWN keys to increase/decrease values.
4. Use the LEFT/RIGHT keys to navigate between Hour, Minutes
and Seconds.
5. When Seconds is active, use the RIGHT key to go to the SET
option.
6. If needed, use the UP key to navigate back to the Time row.
7. Select SET to set the displayed time.
8. Use the LEFT key to return to the SETTINGS menu.
8.3 Messages and Warnings
As a result of different events, messages and warnings may be
displayed on the
REFLEX™ EZ-COM unit.
8.3.1 General
The messages described in this section may appear in all types of
surveys.

Reflex EZ-TRAC Specifications

General

Brand	Reflex
Model	EZ-TRAC
Category	Measuring Instruments
Language	English