Reflex EZ-TRAC User Manual

MANUAL – REFLEX EZ-TRAC™ | 39
OK Use the OK key to select the active option.
LEFT Use the LEFT key to return to the MAIN menu.
8.2.4.1 Units
The unit setting defines the linear, angular and temperature units to
be used when presenting the survey results on the
REFLEX™ EZ-COM
display.
The units that are set when a survey is started, are saved in the data
file of the survey. These settings will apply when the survey is opened
in
REFLEX™ SProcess. However, the current settings in the
REFLEX™ EZ-COM unit take precedence over the settings in the data
file when the results are displayed on the unit.
Figure 28 Units menu
UP/DOWN Use the UP/DOWN keys to navigate between the menu options.
OK Use the OK key to select the active option.
LEFT Use the LEFT key to return to the SETTINGS menu.
Figure 29 Current unit setting
View current units
1. From the SETTINGS menu, select Units.
2. From the UNITS menu, select View current settings.
3. The current unit settings are displayed.
4. Select MAIN MENU to return to the MAIN menu or
BACK to return to the UNITS menu.

Reflex EZ-TRAC Specifications

General

Brand	Reflex
Model	EZ-TRAC
Category	Measuring Instruments
Language	English