MANUAL – REFLEX EZ-TRAC™ | 9
2.1.4 Equipment
Instrument probe The REFLEX EZ-TRAC™ instrument probe is a robust tube that holds
the electronic sensors, the onboard computer and the battery pack. In
the upper end of the probe there is an IR port, which is used for
communication with the control unit. The outer diameter of the probe
is 35 mm.
Extension rods Since
REFLEX EZ-TRAC™ is a magnetic instrument, it has to be placed
at a distance from any magnetic interference. Aluminium extension
rods are used for this purpose.
Control unit The
REFLEX™ EZ-COM unit is used to control the REFLEX EZ-TRAC™
instrument.
REFLEX™ EZ-COM is a robust handheld unit developed by
REFLEX™. The user interface is menu driven and provides Single
Shot and Orientation functionality as standard, with Multi Shot as a
license key enabled option.
2.1.5 Post processing of data
The survey data can be downloaded to REFLEX™ SProcess, a
Windows based processing software. In addition to the survey results
presented on the
REFLEX™ EZ-COM unit, regional and local
coordinates of Multi Shot surveys are calculated and presented in
REFLEX™ SProcess.
Reflex SProcess
REFLEX™ SProcess provides a single integrated project area for
viewing, printing and exporting survey data generated by
REFLEX™
instruments. Survey data can be exported to other programs for
further processing, such as exploration and mine planning systems.
2.2 Warranty
Worldwide warranty The REFLEX EZ-TRAC™ instrument and REFLEX™ genuine parts are
covered by a worldwide warranty of material and workmanship.
Registration slip The warranty documentation is included in the delivery package. The
warranty registration slip in the lower part of the document should be
returned to
REFLEX™, to ensure that you are correctly listed for the
full terms of the warranty.
Misuse
REFLEX™ reserves the right to repair or replace defective
component(s) as necessary. The warranty does not cover faults due
to misuse, damage caused by unauthorized modification to the
instrument or if instructions in the user documentation are not
followed.
2.2.1 Shipping instructions for instrument return
If any malfunction should occur, please contact REFLEX™ or your
authorized
REFLEX™ distributor for instructions.
Transport case Please use the original transport case for return shipment. Do not
ship until you get shipping instructions.
To Next Page
Loading...
Need help?
General
