MANUAL – REFLEX EZ-TRAC™ | 40
Figure 30 Select linear unit
Set linear unit
1. From the UNITS menu, select Set Linear unit.
2. Use the UP/DOWN keys to navigate between the METER and
FEET options.
3. Use the OK key to select the active option.
Figure 31 Select angular unit
Set angular unit
1. From the UNITS menu, select Set Angular unit.
2. Use the UP/DOWN keys to navigate between the DEGREE and
GRAD options.
3. Use the OK key to select the active option.
Figure 32 Select temperature unit
Set angular unit
1. From the UNITS menu, select Set Temperature unit.
2. Use the UP/DOWN keys to navigate between the CELSIUS and
FAHRENHEIT options.
3. Use the OK key to select the active option.
To Next Page
Loading...
