23
Equipment Operation
DVD PLAYER FUNCTION SETUP
General Set Up
This menu can be used to choose audio language, sub-
title language, OSD language, and DVD menu language.
You need to set up these items when you begin to play a
DVD disc. When you start to play a DVD disc, the DVD
player will automatically choose a default language if it
contains the language. See the DVD owner’s manual for
more detailed function operations.
♦♦
♦♦
♦ You can press SETUP button on the remote control to
bring up this setup menu.
♦♦
♦♦
♦ Use UP/DOWN arrow buttons to select the item you
desire to change.
♦♦
♦♦
♦ Use LEFT/RIGHT arrow buttons to change your set-
ting.
♦♦
♦♦
♦ Use UP/DOWN arrow buttons to exit the item you
want.
♦♦
♦♦
♦ Use UP/DOWN arrow buttons to page icon and high-
light it. Use LEFT/RIGHT arrow buttons to change setup
menu page.
♦♦
♦♦
♦ After finishing your setting, you can choose SETUP to
exit and save these modifications into memory.
OSD Language
This item is used to select the OSD ( On-screen display)
language.
Screen Saver
This item is used to open/close screen saver.
♦♦
♦♦
♦
Open: Screen saver will automatically be excuted if
the screen keeps still for fifteen minutes.
♦♦
♦♦
♦ Close: Screen saver would not be used.
Load Setup Def:
This item is used to restore all menus as manufacturer’s
defaults, except anything related to the parent control sub
item. Use reset.
Language SetUp
♦♦
♦♦
♦ Menu: When you start to play a DVD disc, the player
will automatically select its default menu language from
English, French, Russian, Japanese, or German.
♦♦
♦♦
♦ Audio: When you start to play a DVD disc, the player
will automatically select its default audio language from
English, French, Russian, Japanese, or German.
♦♦
♦♦
♦ Subtitle: When you start to play a DVD disc, the de-
fault subtitle of this player will automatically be displayed.
Languages can then be chosen from English, French, Rus-
sian, Japanese, or German.
To Next Page