88
Chapter 7
BILGE PUMP/FLOAT SWITCH
The 3760 features one bilge pump and float switch in the
aft bilge and a second set located in the forward bilge.
They are operated through the dash switches. There are
separate switches marked forward and aft bilge pumps.
In the “off ” position both switches are connected into
the automatic float switch. In this “auto” position if the
boat takes on water, the bilge pumps will activate and
pump excess water overboard. The center switch area
lights up when activated.
Periodically check the grates for debris and spray the units
down with water. Make sure a steady stream of water
exits the through hull fitting indicating the hose from the
bilge pump itself is debris free.
Bilge Pump
Automatic Float Switch
Grates
To Next Page
Loading...
