52
Chapter 7
Changing the information displayed.
Enter Switching Display mode by pressing the control knob
for at least 1 second
“DISP SEL” is displayed.
Select the display item
Push the control knob toward >> or >>.
In Tuner source
Inf
or
ma
tion
Display
Frequency “Freq”
Clock “Clock”
In CD & External disc source
Inf
or
ma
tion
Display
Disc Title “D Title”
Track Title “T Title”
Track Number & Play Time “P-Time”
Clock “Clock”
In Audio file source
Inf
or
ma
tion
Display
Song Title & Artist Name “Title”
Album & Artist Name “Album”
Folder Name “Folder”
File Name “File”
Track Number & Play Time “P-Time”
Clock “Clock”
In Standby/Auxiliary input source
Inf
or
ma
tion
Display
Source Name “SRC Name”
Clock “Clock”
Exit Switching Display mode by pressing the control knob.
If the contents of the information cannot be displayed, Play
Time frequency is displayed.
Album name cannot be displayed in WMA file.
Dimmer Control
You can lower the brightness of the display by using the dim-
mer function.
Press the DIM button for at least 1 second.
Each time you press the button for 1 second, the Dimmer
control turns ON and OFF.
When the Dimmer control is ON, “DIM ON” is displayed.
Theft Deterrent Faceplate
The faceplate of the unit can be detached to deter theft.
Remove the faceplate by pressing the Release button.
The faceplate unlocks, allowing you to detach it.
The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
Keep the faceplate in the faceplate case when deattached.
Do not expose the faceplate or its case to direct sunlight or
excessive humidity or heat. Keep them away from dusty en-
vironments and splashing water.
Install the faceplate by aligning the projections on the unit
with the grooves on the faceplate.
Push the faceplate in until it clicks. The face plate at this
point is locked in place.
Telephone Mute
The audio system automatically mutes when a call comes in.
When a call comes in
“Call is displayed”
The audio system pauses.
Switching Display
To Next Page
Loading...
