25
Cosmetic Care & Maintenance
BATTERY PARALLEL SWITCH
If the battery parallel switch fails to operate, check the
breaker located above the push button switch. Always
find the cause of the problem before resetting the circuit
breaker.
A second area to investigate is the battery solenoid located
at the forward engine bulkhead. When the switch is
pressed the solenoid energizes the appropriate second
battery for additional engine cranking capability.
Normally if you hear a solenoid click it is operating
properly. Check all solenoid and battery connections for
tightness.
Battery Parallel
Solenoid
Windlass
Junction
If the battery switch panel should lose power to one of
the batteries, check the 105 amp breaker located on the
panel. These breakers protect the battery circuitry. Always
find the cause of the problem before resetting the circuit
breaker.
BATTERY SWITCH PANEL
To Next Page
Loading...
