185
Equipment Operation
Generator- Fault Shutdowns
The generator unit shuts down automatically under the
fault conditions on the following pages. The display panel
at the unit will show a default code.
The generator cannot be restarted until the fault condi-
tion is corrected and the controller is reset. See the shut-
down code listing on the next page.
The high engine temperature switch automatically resets
when the generator cools down. However, the fault does
not clear until the controller is reset.
The controller displays a fault warning code but the gen-
erator does not shut down under the conditions shown
below in the illustration.
FAULT WARNING CODES- NO SHUTDOWN
To Next Page
Loading...
