146
Chapter 7
6. The table leg is located under the circular seat. Place
the table leg into the table receiver which is located on
the bottom of the table. See illustration D.
6. Turn the table receiver knob until it is tight against the
leg.
Table Leg
D
Cockpit Table-Underside
E
7. Insert the table and leg into the pedestal base. Check
for tightness. See illustration D.
8. Push the adjuster rod which moves the table fore and
aft for proper spacing.
Rod- In & Out
Adjuster
Auxiliary Leg
Receiver
Knob
Table Receiver
Pedestal Base
To Next Page
Loading...
