RC-TOOLKIT BACNET MSET TOOL
42
2012-2015 Reliable Controls Corporation
TO USE THE BACNET MSET TOOL
1 Connect a PC to a BACnet network using one of the physical connection
methods earlier in this section.
2 Launch RC-Toolkit.
3 If using a direct connection, ensure that the correct communication port is
selected in the Port field.
FIGURE 33: DIRECT CONNECTION AND COMMUNICATIONS PORT
4 If using TCP/IP to connect, enter values for the IP Address field and the BACnet
Port field of any IP-connected device on the BACnet internetwork.
FIGURE 34: TCP/IP CONNECTION
5 Double-click the MSet icon, then select the BACnet button to launch the
application.
6 The RC-Toolkit, BACnet MSet dialog box opens.
FIGURE 35: RC-TOOLKIT, BACNET MSET DIALOG BOX
Accessible BACnet network numbers are listed in the Networks frame on the left
hand side of the screen. Select a network number and click the Discover button
to discover all BACnet devices on that network.
To Next Page
Loading...
