10A-106
ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine/gearbox assembly: Removal - Refitting
K4M
10A
a Remove the bolt (19) between the windscreen
washer reservoir and the front end panel.
a Remove:
-the front end panel clips (20) ,
-the front end panel bolts (21) ,
-the front of the vehicle.
a Disconnect the connectors (22) from the offset posi-
tive terminal.
a Unclip the offset positive terminal wiring from the off-
set positive terminal.
a Remove the battery cable nuts (23) from the offset
positive terminal.
a Move aside the battery cables.
HEADLIGHT WASHERS WITH BLADE
136535
135719
135508
135507
To Next Page
Loading...
