10A-121
ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine/gearbox assembly: Removal - Refitting
K9K, and 830 or 832
10A
-the diesel heater wiring from the radiator mounting
cross member.
a Move aside the diesel heater wiring.
a Disconnect the brake servo pipe union (36) from the
vacuum pump.
a Unclip the manual gear selector cables (37) by:
- pinching the manual gear selector (A) ,
- pulling the manual gear selector pin (B) ,
- lifting the manual gear selector (C) from the manual
gear selector mounting.
a Move aside the manual gear selector cables.
134490
K9K, and 832
134484
101743
To Next Page
Loading...
