Renault F4R - Page 381

11A-207
TOP AND FRONT OF ENGINE
Oil decanter: Removal - Refitting
K4M
11A
-new bolts on the oil separator.
a Torque tighten in order the oil separator bolts (15
N.m).
III - FINAL OPERATION
a Refit:
-the inlet manifold (see 12A, Fuel mixture, Inlet
manifold: Removal - Refitting, page 12A-23) ,
-the three ignition coils on the flywheel end (see
17A, Ignition, Coils Removal - Refitting, page
17A-1) ,
-the scoop under the scuttle panel grille (see Scoop
under scuttle panel grille: Removal - Refitting)
(56A, Exterior equipment),
-the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (56A, Exterior equipment),
-the windscreen wiper arms (see Windscreen wi-
per arm: Removal - Refitting) (85A, Wiping -
Washing),
-the throttle valve (see 12A, Fuel mixture, Throttle
valve: Removal - Refitting, page 12A-17) ,
-the engine cover.