Renault F4R - Page 607

13B-95
DIESEL INJECTION
High-pressure pipe between the rail and injector: Removal - Refitting
K9K, and 832
13B
-the connector for the fuel flow regulation solenoid
valve,
-the connector for the fuel pressure regulation sole-
noid valve,
-the connector for each diesel injector,
-all heater plug connectors.
a Clip the diesel injector wiring onto the rocker cover.
III - FINAL OPERATION
a Fit the dipstick guide tube.
a Refit:
-the dipstick guide bolts,
-the dipstick,
-the injection rail protector cover,
a Clip on the injector rail protector cover.
a Refit the turbocharger air outlet pipe (see 12B, Tur-
bocharging, Intercooler air inlet pipe: Removal -
Refitting, page 12B-41) .
a Fit the intercooler air outlet pipe.
a Connect the intercooler air outlet pipe on the damper
valve.
a Torque tighten the clip for the intercooler air out-
let pipe on the damper valve (5.5 N.m).
a Clip the turbocharger pressure sensor wiring onto
the intercooler air outlet pipe.
a Connect the turbocharger pressure sensor connec-
tor.
a Clip the wiring for the damper valve onto the injector
rail protector cover plate.
a Connect:
-the camshaft position sensor connector,
-the connector to the damper flap.
a Refit the engine cover.
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
a Check that there are no diesel leaks.