PG-FP5 CHAPTER 4 PROGRAMMING GUI USAGE
R20UT0008EJ0400 Rev. 4.00 Page 53 of 240
Jul 15, 2010
Figure 4-12. Checksum Result <If Downloaded PR5 File Is for Target Device That Supports Data Flash>
(4) [Q
uit] command
The [Quit] command terminates the programming GUI. The programming GUI can also be terminated by clicking
the × button on the right end of the title bar in the main window. When the programming GUI is terminated,
various settings are saved in the INI file (FP5.ini), and these settings are loaded when the programming GUI is
started the next time. The INI file is created in the WINDOWS folder.
To Next Page
Loading...
