PG-FP5 CHAPTER 4 PROGRAMMING GUI USAGE
R20UT0008EJ0400 Rev. 4.00 Page 99 of 240
Jul 15, 2010
<4> [Set Security command options] area
The security flag settings block protection settings, and reset vector handling function setting can be set in this
area. When the [Set Security
] command is executed, the settings in this area will be reflected in the target device.
Figure 4-69. [Security flag settings] Area
<5> [Security flag settings] area
The security flag settings can be selected in this area.
Figure 4-70. [Security flag settings] Area
<R>
To Next Page
Loading...
