Renkforce RF2000 v2 Series User Manual

24
Print File Back
Files
Position Home all
HomeX
HomeY
Home Z
PositionX X:0.00mm
End stop min: Off/On
End stop max: N/A
Single Move/1 mm/10 mm/50 mm/Single Steps
PositionY Y:0.00mm
End stop min: On/Off
End stop max: N/A
Single Move/1 mm/10 mm/50 mm/Single Steps
Position Z Z: 0.00 mm
End stop min: On/Off
End stop max: Off/On
Single Move/1 mm/10 mm/50 mm/Single Steps
Position extruder E: 0.00 mm
1 click = 1 mm
Extruder Temp. Bed: 0°C
Temp. 0 : 0°C
Temp. 1 : 0°C
Extruder 0 off
Extruder 1 off
Active Extruder: 0/1
Position extruder E: 0.00 mm
1 click = 1 mm
Load Filament
Unload Filament
Set E Origin
Fan Speed Fan Speed: 0%
Turn Fan off
Fan to 25%
Fan to 50%
Fan to 75%
Fan to 100%
SD Card Print File Back
Files
Delete File Back
Files

Renkforce RF2000 v2 Series Specifications

General

Brand	Renkforce
Model	RF2000 v2 Series
Category	3D Printers
Language	English