IFAX Specifications
D432/D433 142 SM
5.2 IFAX SPECIFICATIONS
Connectivity:
Local area network
Ethernet 100base-Tx/10base-T
IEEE802.11a/g, g (wireless LAN), 1000 Base-T
Resolution:
Main scan: 400 dpi, 200 dpi
Sub scan: 400 dpi, 200 dpi, 100 dpi
To use 400 dpi, IFAX SW01 Bit 4 must be set to “1”.
Transmission
Time:
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Document Size:
Maximum message width is A4/LT.
To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit 2
(A3) must be set to “1”.
E-mail File
Format:
Single/multi-part
MIME conversion
Image: TIFF-F (MH, MR, MMR)
Protocol:
Transmission:
SMTP, TCP/IP
Reception:
POP3, SMTP, IMAP4, TCP/IP
Data Rate:
100 Mbps(100base-Tx)
10 Mbps (10base-T)
To Next Page
Loading...
Need help?
General Specifications
