Service Program Mode
D037/D038/D040/D041 5-2 SM
SP Mode Button Summary
Here is a short summary of the touch-panel buttons.
Opens all SP groups and sublevels.
Closes all open groups and sublevels and restores the initial SP mode display.
Opens the copy window (copy mode) so you can make test copies. Press SP
Mode (highlighted) in the copy window to return to the SP mode screen,
Enter the SP code directly with the number keys if you know the SP number. Then
press. (The required SP Mode number will be highlighted when pressing . If
not, just press the required SP Mode number.)
Press two times to leave the SP mode and return to the copy window to resume
normal operation.
Press any Class 1 number to open a list of Class 2 SP modes.
Press to scroll the show to the previous or next group.
Press to scroll to the previous or next display in segments the size of the screen
display (page).
¡
Press to scroll the show the previous or next line (line by line).
¢
Press to move the highlight on the left to the previous or next selection in the list.
To Next Page
Loading...
Need help?
General Specifications
