Reboot/System Setting Reset
SM 5-19 D037/D038/D040/D041
System
Maintenance
Reference
5.4 REBOOT/SYSTEM SETTING RESET
5.4.1 SOFTWARE RESET
You can reboot the software with one of the following two procedures:
1. Turn the main power switch off and on.
2. Press and hold down together for over 10 seconds. When the machine beeps
once, release both buttons. After “Now loading. Please wait” shows for a few seconds,
the copy window will open. The machine is ready for normal operation.
5.4.2 SYSTEM SETTINGS AND COPY SETTING RESET
System Setting Reset
The system settings in the UP mode can be reset to their defaults. Use the following
procedure.
1. Press User Tools/Counter .
2. Hold down and then press System Settings.
You must press first.
3. Press yes when the message prompts you to confirm that you want to reset the system
settings.
4. Press exit when the message tells you that the settings have been reset.
Copier Setting Reset
Use the following procedure to reset the copy settings in the UP mode to their defaults.
1. Press User Tools/Counter .
2. Hold down and then press Copier/Document Server Settings.
You must press first.
To Next Page
Loading...
Need help?
General Specifications
