System Service Mode
D037/D038/D040/D041 9-4 SM Appendix
1007 [By-Pass Size Detection] By-Pass Size Detection Display
0:LT SEF/ 1:LG *ENG -
001
Enables or disables the automatic paper size detection function of the by-pass
tray.
This SP determines what paper size the machine detects if the detected size is
less than 8.5”.
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1101 [Flicker Control]
001 Flicker Control *ENG
[0 or 1 / 0 / 1 /step]
0: Flicker Control: OFF
1: Flicker Control: ON
1103 [Fusing Idling] Fusing Idling Adjustment
011 Idling Start Temp. *ENG
[0 to 75 / 75 / 1 deg/step]
012 Forced Idling Stop *ENG
[0 to 1 / 0 / 1 /step]
013 Forced Idling Stop Temp. *ENG
[100 to 180 / 100 / 1 deg/step]
014 Minimum Idling Time *ENG
[0 to 10 / 2 / 1 sec/step]
016 Extra Idling Time (L) *ENG
Specifies how long the extra idling
operation is executed for each
environment.
[0 to 60 / 0 / 1 sec/step]
Each environment is determined
with SP1112-001 and 002.
017 Extra Idling Time (H) *ENG
018 Extra Idling Time (M) *ENG
[0 to 60 / 0 / 1 sec/step]
019 Ex Idling Temp:P-Roll *ENG
[0 to 160 / 100 / 1 deg/step]
020 Control Switch Temp *ENG
[0 to 15 / 15 / 1 deg/step]
To Next Page
Loading...
Need help?
General Specifications
