Ricoh Aficio MP C2050 Service Manual

System Service Mode
D037/D038/D040/D041 9-6 SM Appendix
Pressure Ready Temp *ENG
[0 to 150 / 20 / 1 deg/step]
007
Sets the heating roller offset temperature at the end of the heating roller. This
value is one of the thresholds to determine if the machine is at the heating
roller target temperature during warm-up.
010 Stand-By: Center * ENG
[140 to 170 / 160 / 1 deg/step]
011 Stand-By: End * ENG
[140 to 170 / 165 / 1 deg/step]
Stand-By:P-Roller * ENG
[135 to 165 / 155 / 1 deg/step]
012
Sets the pressure roller offset temperature. This value is one of the thresholds
to determine if the machine is at the heating roller target temperature during
warm-up.
013 Panel Off Mode: Center * ENG
[100 to 150 / 130 / 1 deg /step]
014 Panel Off Mode: Ends * ENG
[100 to 150 / 130 / 1 deg /step]
015 Panel Off Mode: P-Roller *ENG
[135 to 165 / 150 / 1 deg /step]
016 Low Power: Center *ENG
017 Low Power: Ends *ENG
[30 to 100 / 40 / 1 deg /step]
018 Low Power: P-Roller *ENG
[30 to 155 / 100 / 1 deg /step]
019 Off Mode: Center *ENG
020 Off Mode: Ends *ENG
[0 to 180 / 0 / 1 deg /step]
021 Off Mode:P-Roller *ENG
[0 to 170 / 0 / 1 deg /step]
030 Plain:FC:Simplex:Center *ENG
031 Plain: FC: Simplex: Ends *ENG
032 Plain:FC:Duplex:Center *ENG
033 Plain: FC: Duplex: Ends *ENG
034 Plain: BW: Simplex:Center *ENG
035 Plain: BW: Simplex: Ends *ENG
[125 to 175 / 145 / 1 deg /step]

Ricoh Aficio MP C2050 Specifications