System Service Mode
SM Appendix 9-223 D037/D038/D040/D041
Appendix:
SP Mode
Tables
5828 [Network Setting]
*CTL
-
001
IPv4 Address
(Ethernet/IEEE 802.11)
002
IPv4 Subnet Mask
(Ethernet/IEEE 802.11)
003
IPv4 Default Gateway
(Ethernet/IEEE 802.11)
006
DHCP (Ethernet/IEEE
802.11)
021 Active IPv4 Address
022 Active IPv4 Subnet Mask
023
Active IPv4 Gateway
Address
Not Used
050
1284 Compatibility
(Centro)
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
052 ECP (Centro)
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
 This SP is activated only when
SP5-828-50 is set to "1".
065 Job Spooling
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
066
Job Spooling Clear: Start
Time
Treatment of the job when a spooled job exists at
power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)