Ricoh Aficio MP C2050 Service Manual

Printer Service Mode
SM Appendix 9-359 D037/D038/D040/D041
Appendix:
SP Mode
Tables
Enable: All print jobs will be output face-up in the destination tray.
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
006
007
Bit Switches 6 and 7 0 1
bit0-6
DFU
bit 7
This bitsw determines the timing of the PJL USTATUS JOB END sent when
multiple collated copies are being printed.
0 (default): JOB END is sent by the device to the client after the first copy has
completed printing. This causes the page counter to be incremented after the
first copy and then again at the end of the job.
1: JOB END is sent by the device to the client after the last copy has finished
printing. This causes page counter to be incremented at the end of each job.
-
1001 Bit Switch
008 Bit Switch 8 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3
[PCL,PS]: Allow BW jobs to print without
requiring User Code
Disable Enable
Enable: BW jobs submitted without a user code will be printed even if
usercode authentication is enabled.
 Color jobs will not be printed without a valid user code.
bit 4 DFU - -
bit 5 DFU - -
bit 6
[PS]: Orientation Auto Detect Function
Enable Disable
Disable: Automatically chooses page orientations of PostScript jobs
(Landscape or Portrait) based on the content printed on the page.
⇒
Rev. 12/20/2010

Ricoh Aficio MP C2050 Specifications