5118
[Disable Copying]
This program disables copying.
001 *CTL [0: Not disabled/ 1: Disabled]
5120
[Mode Clear Opt. Counter Removal]
This program updates the information on the optional counter. When you install or remove
an optional counter, check the settings.
001 - *CTL
[0: Yes (removed)/ 1: Standby (installed but not
used)/ 2: No (not removed)]
5121
[Counter Up Timing]
This program specifies when the counter goes up. The settings refer to “paper feed” and
“paper exit” respectively.
001 0:Feed 1:Exit *CTL [0: Feed/ 1: Exit]
5127 [APS Mode] *CTL
[0 or 1 / 0 / 1/step]
[0: Not disabled/ 1: Disabled]
001 This program disables the APS.
5128
[Code Mode With Key/Card Option]
Sets whether a user code and an accounting machine are combined or not.
001 - *CTL
[0 or 1 / 0 / 1/step]
Not combined: 0
Combined:1
5131
[Paper Size/Type Selection]
The program selects a paper size system from the following alternatives: the AB system
(0), the LT system (1), and the AF system (2).
001 - *ENG [0 :JP(Japan) /1: NA / 2: EU/ASIA]
5140 [Disable Duplex for Tray]
Main SP Tables-5
269
To Next Page
Loading...
Need help?
General
