2. Insert the Bluetooth Interface adapter [A] into the USB connector (Either USB connector can be
connectable).
3. Plug the power cable and turn on the power of the machine.
4.
Make sure that the machine can recognize the option (see "Check All Connections" at the end of
this section).
• The Bluetooth interface unit and the Wireless LAN interface unit cannot be used
simultaneously.
VM Card Type T
• Unplug the main machine power cord before you do the following procedure.
1. Remove the SD-card slot cover [A] from the SD card slots ( x 1).
Controller Options
141
To Next Page
Loading...
Need help?
General
